2024 Exmark Quest X-Series QZX735GKC48300

Information

2024 Exmark Quest X-Series QZX735GKC48300

A new armrest-equipped operator seat provides a smooth ride over bumpy lawns, while a deeper floor pan offers increased legroom for the operator. A standard deck step is included to ease mounting and dismounting the machine, while an integrated hitch and tools-free belt shields ease access for service and maintenance. However, with just two annual grease points and low-maintenance integrated hydro transmissions, servicing the Quest X-Series isn’t something you’ll need to do often. That’s more time for you to do the things you love.

Features may include:
  • UltraCut Series 3 Cutting Deck
  • Commercial-Grade Tires
  • Engine Protection
  • Integrated Hydro Transmission
  • Upgraded Operator Seat

Photos

Highlights

  • Greencastle, Indiana
  • 2024
  • Exmark
  • Quest X-Series QZX735GKC48300
  • Model: KT735 | Spec: 3099 | Series: 7000 Series
  • Gas Carbureted
  • Available
  • 59.5 in. (151.0 cm)
  • Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat. | 47.6 in. (121.0 cm)

Specifications

  • 2024
  • Exmark
  • Quest X-Series
  • QZX735GKC48300
  • Zero-Turn Mower
  • Model: KT735 | Spec: 3099 | Series: 7000 Series
  • Brand: Kohler
  • 735
  • 3,600 rpm
  • Standard Engine Manufacturer's air filter
  • Fuel Indicator: Translucent Visual | Carbureted
  • Gas Carbureted
  • Engagement: Electromagnetic 105-ft-lb clutch
  • Hydro-Drive | Description: Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
  • Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
  • Lever-actuated pawl brake.
  • 22 x 11-10 K3012 | Caster: 13 x 6.5-5 smooth-tread, pneumatic.
  • 22 x 11-10 K3012
  • 12 volt battery with 15-amp alternator
  • Forward: 0–8.0 mph (12.9 kmph) | Reverse:0–5.0 mph (8.0 kmph)
  • Blade: Approximately 18,500 fpm.
  • Tractor: Unibody, riveted 10-guage steel.
  • Package: Operator Presence Controls (OPC) and drive system interlock.
  • Casters: .375" thick caster yoke arms.
  • Blade Cutter Housing: 7.30" | Blade Shaft: 17mm (.67")
  • Deck: 48"
  • 59.5 in. (151.0 cm)
  • Blades: 3 Blades at 16.25" | 76.0 in. (193.0 cm)
  • Cutting: 1.5" (3.8 cm) to 4.5" (11.4 cm) in 0.50" (1.3 cm) increments, adjustable from operator's seat. | 47.6 in. (121.0 cm)
  • 3-gallon (11.0-L), single fuel tank with single fill locations
  • Curb: 680
  • Commercial grade, high back contoured foam padded with arm rests. Hinged mounting and spring suspension. Adjustment is fore and aft for operator position.
  • Style: Floating | Style Description: Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.